Industrial Oven Systems

Catalytic Industrial Ovens - conveyor IR / infrared ovens as drying ovens equipment; convection oven technology

	Catalytic infrared heating saves up to 80% of the energy & time needed by convection ovens or electric infrared ovens.

Catalytic Industrial Systems manufactures catalytic industrial oven systems,
infrared heating systems and convection cure ovens that meet the most
popular requirements of buyers and specifiers of process heating systems.

Paint drying ovens - dry-off, combination, and infra-red or convection cure ovens; zoned heating

Catalytic Has the Most Extensive
Experience with These 5 Main Infrared
Industrial Oven Types

INFRARED CURE OVENS
Infrared cure ovens have quick cure cycles, allowing system size to be
minimized. The result is an oven that has a smaller footprint than
a conventional convection oven. MORE

COMBINATION INFRARED / CONVECTION OVEN
Industrial oven systems that are "combination" type use infrared energy
to ramp-up product temperatures prior to a convection “soak” stage,
where finish curing or drying is completed.

Infrared emitters can be retrofitted inside an existing convection oven to
increase production within restricted spaces. Or, a combination system can
be engineered to accommodate a broad range of part sizes and shapes.
MORE

POWDER GEL/ RAMP-UP OVEN
A ramp-up industrial oven sets or “gels” the powder coating by accelerated
temperature rise, to prevent powder loss and reduce the soak time needed
for curing. MORE

DRYING OVENS
A drying oven is used after cleaning or pretreatment, prior to the
application of paints, powder coating, adhesives or inks. MORE

CONVECTION OVENS
A convection industrial oven is an economical choice if floor space and/or
production levels are not major considerations. A convection oven is
practical where numerous part sizes, configurations and material
thicknesses are processed simultaneously. MORE

.............................................................................................

Infrared Oven Retrofits

When an existing industrial oven is unable to cure products properly due
to increased production demands or change in coatings chemistry, an infrared
retrofit is a cost-effective alternative to a new system.

Infrared oven retrofits can replace a portion or all of the existing convection
oven enclosure, converting the convection oven to infrared. This can increase production, shorten enclosure length, and save energy.

Catalytic infrared oven retrofits can be supplied with new sensors,
controls and operator interface if needed.

.............................................................................................

Industrial Oven Features

Full compliance with NFPA 86
Gas trains equipped with manual shutoff valves, gas filters
and pressure regulators. Gas pipes, fittings and valves meet
requirements of NFPA 54, National Fuel Gas Code
PLC-monitored
Purge cycle before startup
Exhaust and recirculation fans
Explosion relief
Safety design data form and warning labels
Electrical installation in accord with NFPA 70, National Electrical Code
All wires marked with colored number codes
Heater zones piped in loops for even gas flow and pressure
Oven and controls fully assembled and tested before shipment
Control panel systems are protected by circuit breakers.

.............................................................................................

Catalytic Industrial Systems
20th and Sycamore • Independence, KS 67301
E-mail: sales@catalyticirovens.com
(800) 835-0557

Custom designed infrared waterborne drying ovens and curing equipment from Catalytic Industrial Systems